Iklan Billboard 970x250

[Solved] G920f Odin Flash Error Hidden. Img Fail | Samsung Galaxy S6

Featured Post

Firmware Dan Cara Flashing Oppo A39 Cph1605 [Tested]

Pada halaman ini kami akan bagikan kembali link download firmware oppo a39 cph1605 terbaru sebagai materi flashing perangkat anda. sekaligus tutorial cara flash oppo a39 dengan pc dan tanpa pc (update ota). File stock rom ya…

[Solved] G920f Odin Flash Error Hidden. Img Fail | Samsung Galaxy S6

 I came across several tutorials suggesting you should delete the  [SOLVED] G920F Odin flash error hidden. img FAIL | Samsung Galaxy S6
Samsung G920F Error hidden.img fail
I tried flashing 6.0.1 to my G920I and got the big red FAIL notification...
Turns out it was due to the "hidden.img" file, inside of the downloaded tar.md5 file:

I came across several tutorials suggesting you should delete the "hidden.img" file from the main image file, and re-flash the entire image file, but that is unnecessary.
This method flashes the "hidden.img" image file only, so the entire process takes just a few minutes, and the flashing process alone takes just a few seconds.

The fix to this issue follow these steps:
  1. Remove the .md5 extension from the file name so that it ends with .tar only.
  2. Extract the .tar file to its own folder (I recommend 7zip).
  3. Locate the "hidden.img" file.
  4. Rename the "hidden.img" file by adding a ".tar" to it, so that you get "hidden.img.tar".
  5. Get your phone back into download mode:
  6. Reboot it directly into download mode by pressing the volume up + home + power buttons for a few seconds. If that doesn't work (such as in my case - it boots into the error message over and over again) then reboot the device by pressing volume up + volume down + power buttons (without the home button) for a few seconds. When it shuts down quickly press the volume down + home + power buttons to enter download mode.
  7. Reset Odin, and connect the USB cable back into your phone. Odin should display "Added!!".
  8. Click AP and select the "hidden.img.tar" file you renamed before.
  9. Click Start.
Let the device reboot itself a couple of times, and you're done.
LOG ODIN :
<ID:0/020> Added!!
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> SingleDownload.
<ID:0/020> :ÿ&í
<ID:0/020> RQT_CLOSE !!
<ID:0/020> RES OK !!
<ID:0/020> Removed!!
<ID:0/020> Remain Port ....  0
<OSM> All threads completed. (succeed 1 / failed 0)
 I came across several tutorials suggesting you should delete the  [SOLVED] G920F Odin flash error hidden. img FAIL | Samsung Galaxy S6
Odin 3.09

Baca Juga
SHARE
Subscribe to get free updates

Related Posts

Posting Komentar

Iklan Tengah Post